Ladders

Fiberglass Solid Side Ladders

Fire ladders using extruded fiberglass channel rail construction and aluminum rungs welded to aluminum blocks and riveted to the fiberglass side rails.

Series YGE-2
Series YGE-3

4-1/2" Channel Rail
750lb Duty Rated
Special self-extinguishing resin - will not support flame
Special high temperature resins for heat resistance
Special ultra-violet screen for fade resistance
Safety yellow color for better visibility in smoke

Aluminum Roof Ladders

Series 775-A
Series 875-A
Series 1275-A

775-A ladders are avaliable in lengths 10,12 & 14 ft
875-A ladders are avaliable in lengths 16, 18 & 20ft
1275-A ladder are avaliable in lengths 25 & 30ft

Heat Sensor Labels

These labels are heat sensitive material that turn black if any heat is ever present that is greater than approximately 300 degrees F. The 300 degree F temperature is used because once aluminum fire ladder materials (6061-T6 alloy) reach this 300 degree F (even if only for a moment), the ladder material may have lost at least 25% of it's load capacity. This heat exposure effect is not reversible in the ladder and can continue to accumulate over it's entire life.

NOTE: If any heat sensor label becomes black - remove the ladder from service at once and have the ladder load tested before the ladder is ever used again. If the ladder passes the load test - you have had a false alarm - replace the heat sensors and return the ladder to service.